Fluke 805-ES External sensor

Product Code: FLU805-ES

Price

£1320.00 ex. VAT £1584.00 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key features

Low-profile 90-degree sensor body allows the sensor to get into tight spots
Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
Rugged, sealed cable connector with strain relief tail reduces cable wear
Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter

External Vibration Sensor for the 805 Vibration Meter

The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.

Performance
Measurement range	7 g pk (68.7 m/s² pk)
Frequency range	0 to 6000 cpm (0 to 100 Hz)
Relay	3A Form C 480 VAC
Relay (Contacts) (DPDT)	Normally open / closed
Environmental
Temperature range (Operating)	-13 to 140°F (-25 to 60°C)
Enclosure rating	IP66
Physical
Size (Width x Height x Depth)	4.35 x 3.30 x 4.35 in (110.5 x 83.8 x 110.5 mm)
Weight	2.5 lb (1.134 kg)
Sensing element	Magnet
Housing material	Aluminum alloy
Electrical connector	Screw terminals
Screw terminal wire size	24-14 AWG (0.2 - 2.5 mm²)
Cable input	3/4-14 NPT
Mounting hole size	0.25 in (6.4 mm)
Sensing geometry	Inertial element