Metrel MI 3360M Medical OmegaPAT XA PAT Tester

With features aimed specifically at the medical and surgical fields.

Metrel MI 3360 (Medical Set) Comes Supplied With:

• Instrument MI 3360 (25A, M, F) OmegaGT XA
• Bag for accessories
• Smartball pen with touch screen function
• Flash test probe (MI 3360 F only)
• Crocodile clip, red (MI 3360 F only)
• Crocodile clip, black
• Test lead, black
• Test tip, black
• IEC test cable, 2 m
• Mains cable
• USB cable
• Calibration certificate
• Short form instruction manual
• CD with instruction manual (full version) and PC SW Metrel ES Manager 

Measuring Functions:

Please refer to the table below for model specific measuring functions.

• Visual inspections
• Fuse test
• Continuity / Protective earth resistance 200mA;
• Continuity / Protective earth resistance 25A
• Insulation Resistance (Riso, Riso-S);
• Sub-Leakage Current, Substitute Leakage Current - S;
• Differential Leakage current;
• PE leakage current;
• Touch leakage current;
• Insulation resistance, IEC/EN 62353;
• Touch leakage current, IEC/EN 62353;
• Equipment leakage (direct, differential, alternative) IEC/EN 62353;
• Applied part leakage (direct, alternative), IEC/EN 62353;
• Insulation resistance, (optional A 1422) IEC/EN 60974-4;
• Welding circuit leakage, (optional A 1422) IEC/EN 60974-4;
• Primary leakage, (optional A 1422) IEC/EN 60974-4;
• No-load voltage, (optional A 1422) IEC/EN 60974-4;
• Power (P, S, Q, PF, THDu, THDi, CosØ, I, U,);
• PRCD test, (2 pole, 3 pole, K/ Di (varistor), S (3-pole));
• PRCD PE probe test, PRCD open conductor test, PE conductor (PRCD) test;
• RCD test, (type A, AC, B, B+, F);
• Flash test, (1500V, 3000V);
• Polarity / Active polarity test;
• Clamp current (with optional A 1283).
  
  

Advanced Medical Functions (This Model Only):

• Equipment Leakage Current (Alt., Dir., Diff.)
• Applied Part Leakage Current (Alt., Dir., Diff.)
• Touch Leakage Current (Medical)
• AUTOSEQUENCE Medical
• Medical Mode
  
  

Key Features:

• Touch screen: high resolution colour touch screen, 4.3” TFT.
• Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like.
• Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device.
• Read the code and test: QR and barcode system of labelling in combination with AUTOSEQUENCE®s enables the user quick and simple testing of electrical devices.
• Testing groups: the instruments have built-in filters in accordance with their area of application, which enables the user simple choice of needed test sequences.
• Support for PRCD testing: support for all types of PRCDs, including 2-pole, 3-pole, K/Di (varistor), S (3 pole) and testing with the PE probe.
• Support for RCD testing: all instruments support testing of A, AC, B, B+ and F RCDs.
• Fuse testing: the instrument has a special, integrated testing module for quick testing of all types of fuses.
• Hard-wired devices: the instruments have integrated additional test terminals that enable the user simple testing of hard-wired devices.
• High-voltage testing (only MI 3360 F): the instrument enables insulation resistance measurement that has to be performed after repairs or maintenance of electrical devices.
• Testing of medical devices (only MI 3360 M): the instrument enables testing of medical devices in accordance with IEC/EN 62353.
• Testing of welding equipment (only in combination with A 1422): all models of OmegaPAT XA support testing of welding equipment in accordance with IEC/EN 60974-4.
• Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although that can be expanded to 32 GB.
• PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.
• aMESM Android SW: enables QR code scanning, and uploading of pre-prepared user-defined AUTOSEQUENCE®s.