Socket and See Smart Meter Installation Kit

The complete electrical test equipment solution for Smart Meter installation engineers

Assisting industry engineers to implement and practice safe working procedures, during the installation process. All components are suitable for use with PPE, as may be required by company policy for compliance purposes. For CATIV supply side safe isolation, the kit includes a 2 pole safety tester with unique HiZ /LoZ indication for glow tests and an auto-ghost voltage suppression for differentiating between potentially harmless phantom voltages and dangerous live voltages, a vibrating non-contact voltage detector for identifying phase and neutral lines and a single pole contact voltage and phase finder; all of which can be verified using the true AC waveform proving unit without needing to remove it from the custom case. 13A sockets can be checked with the colour coded LED professional socket tester. All components fit safely in a compact and protective carry case, which can be effortlessly carried using either the shoulder strap or belt loop.

The Smart Meter Installation kit Comprises the Following:

1x VIP ESI Electrical Service Industry Safety 2 Pole Tester

Designed specifically for the smart metering engineer with automatic ghost voltage suppression and HiZ / LoZ indication (glow test). The VIP ESI also features colour coded LED indication on the front and on the base of the unit. The prods are interchangeable, either straight or right angled to make testing easier in awkward situations and VIP ESI can be used with insulated gauntlets. Dual insulated wear indicating cable provides additional safety for the user.

• Easy to use - Reduces training
• Auto-ghost voltage suppression
• Dual bank of colour coded LEDs
• HiZ / LoZ indication replicates glow test
• Interchangeable prods (right angle/straight)

1x SP400 Professional proving Unit

True AC output at 50Hz DC component. Ranges from 50 to 690V with ramp up and down feature and bright LED indication. Can also be used to prove none contact voltage detectors and check the continuity feature on some 2 pole testers.

• Voltage ramp
• Continuity check
• 50Hz true AC waveform
• Non-contact voltage pad

1x VVD Pro Vibrating Non-Contact AC Voltage Detector

Operating range 50 - 1000V AC. CAT IV rated 1000V to earth. Vibrates and flashes upon detection of voltages between 50 - 1000V AC. Includes handy LED flashlight.

• Bright LED torch
• Visual verification
• CATIV Safety Rating
• Vibration verification
• 50V - 1000V Voltage range

1x EDF Pro Hazardous Voltage & Phase Finder

• Visual verification
• Audible verification
• Works whilst using PPE
• Capacitive coupling consistent indication
• Heartbeat verification for correct operation

1x SOK32 Professional Socket Tester

Displays correct and 17 other fault conditions. Self test feature to check internal electronics are working correctly. Green LED and constant tone indicate correct wiring. Red / orange LED and warbling tone indicate a fault is present and where. 

• Self check
• Audible verification
• Colour coded LEDs
• Displays correct + 17 fault conditions

1x TECC2 Carry Case

A soft and durable carry case that houses all the components of the Socket & See Smart Meter Installation Kit. It features a front pouch to accommodate the SP400 Proving Unit, meaning the unit does not need removing when being used. The TECC2 also includes a detachable neck strap and belt loop.

• Bespoke Smart Meter Installation case
• Fully operational proving unit whilst in situ
• Complete with detachable neck strap & belt loop
• Durable, compact & safe storage for all kit components