Kewtech KT1710 Voltage Tester

Product Code: KEWKT1710

Price

£28.85 ex. VAT £34.62 inc. VAT

In Stock

Add To Favourites
Detailed Description

The Kewtech KT1710 Voltage Tester is a useful two-pole voltage detector that can detect voltage from 12 to 690V AC/DC.

Key Features:

Designed to the international safety standards IEC 61243-3:2014
Clear LED indication
Continuity test
AC and DC voltage tests up to 690V
Clear audible tone
LED bar graph
Single pole phase test
Double molding gives comfortable grip
Auto power on/off
Probe cover protects user and probe tips
IP54

The Kewtech KT1710 Voltage Tester is a useful two-pole voltage detector that can detect voltage from 12 to 690V AC/DC.

All the user needs to do to check for voltage is introduce the pole tips to the various phases, live, earth and neutral. It is also possible to perform a single-pole phase test and a continuity test with the tester.

When a voltage is detected, the Kewtech KT1710 gives a visual indication using the clear LED bar graph. The nominal voltage level is displayed at 12V, 24V, 50V, 120V, 230V, 400V and 690V and the LEDs will illuminate even without batteries. An additional audio signal also indicates voltage presence.

The Kewtech KT1710 has slimline slender probe tips according to GS38 standard and there is no need to swap ends. The ergonomic, lightweight design and simple controls make the tester very easy to use. It is safety rated Cat III 600V, Cat II 690V and is powered by two AA batteries.

The Kewtech KT1710 is supplied with:

Built in test leads
Batteries
Printed Instruction Manual with Certificate of Conformity

Voltage Test
Voltage Range	12 - 690V AC/DC
Peak Current	12 - 690V AC/DC
Internal Battery	Consumption Approx. 80mA
Measurement	Duty 30s ON/240s OFF duty
Nominal Voltage	12/24/50/120/230/400/690V, AC50~60 Hz, DC (±)
LED Tolerance	According to EN61243-3
Response Time	<0.5s at 100% of each nominal voltage
Single Pole Phase Test
Voltage range	100 to 690V AC (50/60Hz)
Continuity Test
Detection range	0 to 500kΩ + 50%
Internal battery consumption	Approx 80mA
General
Operating ref. conditions	-15~55ºC no Condensation max 85% RH
Storage ref. condition	-20~70ºC no Condensation, max 85% RH
Safety standards	IEC 61010-1:2010, IEC 61243-3:2014
Category	CAT III 600, CAT II 690V, pollution deg 2
IP Rating	IP54 (IEC60529)
Approx dimensions	215 x 58 x 25 mm
Weight	145g (including batteries)
Batteries	3V (2 x 1.5V AAA / R03)