Fluke 709H Precision Loop Calibrator With HART

Product Code: FLU709H

Price

£1539.00 ex. VAT £1846.80 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Best-in-class accuracy at 0.01% reading
Small rugged design operates on (6) standard AAA batteries
Intuitive user interface with Quick-Set knob for fast setup, easy use
Built in selectable 250 Ω resistor for HART communication
24 V DC loop power with mA Measure Mode (-25% to 125%)
Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
Simple two wire connection for all measurements
Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
Variable step & ramp time in seconds
Adjustable span selection (0 to 20 mA or 4 to 20 mA)
Valve Test (simulate defined mA values with % keys)

The Fluke 709H mA loop calibrator is designed to save time and produce high-quality results

The 709H offers HART communication and supports a select set of the HART universal and common practice commands. This makes the 709H unique as both an affordable, compact loop calibrator and powerful HART communication tool.

Fluke 709H Comes Supplied With:

754-8016 Alligator Clip Set
75X-8014 Stackable Lead Set
TP220-4201 Test Probes
AC280-5001 SureGrip Hook Clips
Soft Case
Six AAA batteries (installed)
Product Manual CD-ROM
Quick Reference Guide
Safety Information

HART specific capabilities include:

Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format.
Data logging or recording data on a particular transmitter for troubleshooting. The data log tool offers selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions

The Fluke 709H offers a built-in HART modem for communication capability to perform the following commands:

Read Message
Read Tag, Descriptor, Cal Date
Read Sensor PV Info
Read PV Output Info
Read Long Tag
Write PV Ranges (Upper and Lower)
Enter/Exit Fixed Current Mode
Set Zero Offset
Trim DAC Zero
Trim DAC Gain

In the communicator mode the user will be able to read basic device information, perform diagnostic tests, and trim the calibration on most HART enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. Fluke 709H will allow virtually any technician to service and support HART devices.

Detailed Specifications
Functions	mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges	mA (0 to 24mA) and Volts (0 to 30VDC)
Resolution	1 µA on mA ranges and 1 mV on voltage range
Accuracy	0.01% +/- 2 counts, all ranges (@23° +/- 5°C)
Operating Temperature Range	-10 °C to 55 °C (14 °F to 131°F)
Humidity Range	10 to 95% non-condensing
Stability	20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display	128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
Power	6 AAA alkaline
Battery Life	40 hours typical
Loop Compliance Voltage	24VDC @ 20mA
Over-Voltage Protection	240 VAC
Overload Current Protection	28 mA DC
EMC	EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D)	15 cm x 9 cm x 3 cm (6 x 3.6 x 1.3)
Weight	0.3 kg (9.5 ounces)
Included Accessories	NIST traceable calibration certificate with data, batteries, test leads, and manual
Warranty	Three year