TPI 196 Digital Multimeter

Product Code: TPI196

Price

£171.85 ex. VAT £206.22 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Large size 50000 count display
0-24mA output for process controls
Triple display shows more information than a standard DMM
51 segment analogue bar graph shows fast AC fluctuations
Backlight for use in poor lighting conditions
Autoranging
Separate battery/fuse compartment
Increased safety with silicone rubber 1000V CAT III, CAT IV 600V test leads
Auto power off when left idle
Diode and continuity testing
Test AC/DC voltage to 1000V
AC/DC current testing to 1A
Resistance measurements to 50MΩ
Frequency measurements to 500KHz

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

CALIBRATION	ISS DMM

The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.

The TPI 196 Is Supplied With:

196 Instrument
Rubber Boot
Fuse 0.5A
Fuse 1oA
Test Lead Set
9 Volt Alkaline Battery
Instruction Manual

Applications:

View industrial signals such as motor control, UPS, switching power supplies, and PLC controls with 1MHz bandwidth
Capture noise spikes, glitches, and intermittents with 20 megasamples per second sampling rate
Full autoranging, True RMS, DMM capabilities
Measure resistance and test for continuity
Continually updated display provides a live presentation

TPI 196 Digital Multimeter

DC Volts	Maximum Input: 1000V Maximum Resolution: 0.0001mV Accuracy: +/-0.05%
AC Volts	Maximum Input: 1000V Maximum Resolution: .001mV Accuracy: +/-0.4%
DC Amps	Maximum Input: 1A Maximum Resolution: 0.0001mA Accuracy: +/-0.5%
AC Amps	Maximum Input: 1A Maximum Resolution: 0.0001mA Accuracy: +/-0.75%
Resistance (Ohms)	Maximum Input: 50MΩ Maximum Resolution: 0.01Ω Accuracy: +/-0.05%
Frequency	Maximum Input: 500KHz Maximum Resolution: 0.01Hz Accuracy: +/-0.05%
Capacitance	N/A
Inductance	N/A
Temperature (K-Type Thermocouple)	N/A
Continuity	Audible at less than 30Ω
Diode	3V at 1mA maximum output
Duty Cycle	N/A
True RMS Responding	No
Conductance	No
Pulse Width	No
Data Hold	Yes
Min/Max Record	Yes
Time Stamp Logging	No
Relative Mode	Yes
Compare Mode	Yes
RS-232 Output	Yes, Optically Isolated
Process Loop Output	Yes (0 to 24mA)
Sleep Mode / Auto Off	Yes
Protective Boot	Yes (standard)
Display Type	50,000 count backlit LCD with dual sub displays and analog bargraph
Range Selection	Auto / Manual
Operating Temperature	32°F to 113°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	80% non-condensing
Size	8.3” x 3.7” x 1.9” (210mm x 95mm x 47mm) without boot 8.7” x 4.3” x 2.6 (220mm x 110mm x 65mm) with boot
Weight	1.3lbs (570g) without boot 1.9lbs (850g) with boot
Battery Type	9V Alkaline (NEDA 1604)
Battery Life	50hrs Typical
OverInput Category	CAT III 600V
Agency Approval	cULus 61010-1, IEC 61010-1
Warranty	Limited Lifetime