Dilog DLEV1 EVSE Charge Station Adaptor Kit

EVSE Charge Station Adaptor Kit

The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charge station. Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.

MFT & Load Connection

The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection. In addition to this, there are also 4mm input terminals for single or 3-phase connections.

The DLEV1 is universal to all Electrical Installation Multifunction Testers, such as the Di-LOG DL9130EV and can even be purchased as part of our complete EV test kit, the DL9130EVKIT

DLEV1 Features

PE Pre-test   Yes
PP Simulation Open   Error Condition

Coding for maximum current of the EV cable. EVSE is connected and can operate in any of these conditions.
13A
20A
32A
63A

CP Simulation State A   EV Disconnected
State B   EV Connected
State C   EV charge un-vented
State D   EV charge vented
CP error “E”   On (CP short to PE)/off
CP Signal   CP Signal Output
PE error   On (PE error)/off
DLEVT1 Type 1 EV connector   Yes
DLEVT2 Type 2 EV connector   Yes