Free Standard Delivery On Orders Over £75 before VAT (Other Services Available)

VAT
Trustpilot
VAT
Trustpilot
Fluke 28 MkII Ex Intrinsically Safe Multimeter

Fluke 28 MkII Ex Intrinsically Safe Multimeter

Product Code: FLU28-IIEX

Price
£1288.00 ex. VAT £1545.60 inc. VAT

In Stock


Add To Favourites
Detailed Description

Key Features:

  • A completely sealed, IP67 rated case
  • Withstands drops up to 10 feet or 3 meters (with holster)
  • Dustproof per IEC60529 IP6x
  • Waterproof per IEC60529 IPx7
  • Meets IEC Overvoltage Electrical Safety Standard No. 61010-1:2001
  • Measurement Category III, 1000V, Pollution Degree 2
  • Measurement Category IV, 600V, Pollution Degree 2
  • Reversible holster for added protection of the display when not in use

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Intrinsically Safe. Extreme ruggedness 

All the measurement functions of our most popular industrial DMMs

One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1,2,21, or 22. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.

  • 4-1/2 digit mode for precise measurements (20,000 counts)
  • True-rms ac voltage and current for accurate measurement on nonlinear signals
  • Measures up to 1000V and 10A ac and dc (note that Ex zones require reduced measurements)
  • Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)
  • Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies
  • Resistance, continuity and diode test
  • 10,000 μF capacitance range for components and motor caps
  • Conductance measurements for high resistance or leakage tests
  • Min/Max-Average and Peak capture to record transients and variations automatically
  • Relative mode to remove test lead interference on resistance measurements
  • Auto and manual ranging for maximum flexibility
  • Input Alert protects you by chirping and flashing “Lead when leads are plugged into the wrong inputs
 

Easy to use

Important extras keep you productive all day long in less than optimal conditions.

  • Backlit keypad buttons provide extra visibility in poorly lit areas, even when you’re wearing full PPE
  • Large display digits and 2-level bright white backlight also increases visibility
  • Long battery life – 400 hours typical without backlight (Alkaline)
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

Easy to service in the field

Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.

Now there’s one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone 21 and 22. Whether you work in petroleum, chemical, or pharmaceutical environments, all the test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built. The Fluke 28 II Ex is also waterproof, dust-proof and drop-proof. You’ll be equipped to handle any situation, inside and outside of hazardous zones, without compromising compliance or measurement performance.

 

Intrinsic safety plus regulatory approvals

  The 28 II Ex carries Ex certifications from the world’s 
  leading certification bodies.

  28 II Ex I.S. Certifications

  • IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, I M1 Ex ia I Ma

  28 II Ex safety and regulatory compliance

  • ISA-82.02.01
  • CAN/CSA-C22.2 No. 61010-1-04 /UL61010-1:2004, and TUV 61010-1:2001
  • CE

The Fluke 28 II Ex is the most rugged IS DMM you can buy

About Intrinsically Safe products

Products that appear on this website that are listed as or relate to a classification of intrinsic safety are titled and described according to our best understanding and/or interpretation of the complex and sometimes changing criteria governing such classification as set out by the Health and Safety Executive.

Please note that due to the volatile nature of the intended use of products in this category,  neither UK Test Instruments or Instrument Sales and Service can be held responsible for any incident that arises from the purchase or use of any product described within this web site. For more information please visit the health and Safety Executive website with specific regard to Hazardous Area Classification and Control of Ignition Sources.

Basic Accuracy Specifications
Accuracy specifications are shown as +/- (% of reading + number of digits)
DC voltage
•  Range 0.1 mV to 1000 V
•  Accuracy ±0.05 % + 1
AC voltage
•  Range: 0.1 mV to 1000 V
•  Accuracy: ±0.7 % +4
DC current
•  Range: 0.1 μA to 10 A
•  Accuracy: ±0.2 % + 4
AC current
•  Range: 0.1 μA to 10 A
•  Accuracy: ±1.0 % + 2
Resistance
•  Range: Range: 0.1 Ω to 50 MΩ
•  Accuracy ±(0.2 % + 1)
Conductance
•  Range: 60.00 nS
•  Accuracy: ± (1.0 % + 10)
Diode Test
•  Range: 2.0 V
•  Accuracy: ± (2.0 % + 1)
Duty Cycle
•  Range: 0.0 % to 99.9 %
•  Accuracy: Within ±(0.2 % per kHz + 0.1 %) for rise times <1 µs
Display counts
•  6000 counts/19,999 counts in high-resolution mode
Capacitance
•  Range: 10 nF to 9999 μF
•  Accuracy: ± (1.0 % + 2)
Frequency
•  Range: 0.5 Hz to 199.99 kHz
•  Accuracy: ± (0.005 % + 1)
Temperature
•  Range: -200 °C to +1090 °C (-328 °F to +1994 °F)
•  Accuracy: ± (1.0 % + 10) °C [± (1.0 % + 10) °F]
Peak Capture
•  Record transients up to 250 us
Min/Max/Avg Recording
•  Display signals up to approximately 100 ms

 

Safety Certifications
ATEX 
•  II 2 G Ex ia IIC T4 Gb
•  II 2 D Ex ia IIIC T130 °C Db
•  I M1 Ex ia I Ma
NEC-500 
•  Class I, Div 1, Groups A-D, 130 °C
IEXEx 
•  Ex ia IIC T4 Gb
•  Ex ia IIIC T130 °C Db
•  Ex ia I Ma
GOST R Ex 
(Pending)
•  Overvoltage protection: Measurement Category III, 
 1000V, Pollution Degree 2
•  Measurement Category IV, 600V, Pollution Degree 2
•  IP rating: IP67

 

General Specifications
Power
•  Three AAA batteries
•  Battery life: 400 hours
Display
•  LCD, with backlight
External protection
•  Rubber holster
Warranty
•  Three years
Size with holster
(HxWxL)
•  6.35 cm x 10.0 cm x 19.81 cm
 (2.5 in x 3.93 in x 7.8 in)
Weight with holster
•  698.5 g (1.54 lb)
UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Product Variants