Kewtech KT300DL Digital Insulation Continuity Tester

Product Code: KEWKT300DL

Price

£311.00 ex. VAT £373.20 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Insulation test at 50 V, 100 V, 250 V, 500 V & 1000 V
Continuity test with audible tone
SPD test
30 K ohm continuity range for verifying extraneous conductive parts
Breakdown voltage
Test lead null facility
Buzzer mode
Voltage present LED

*Important Calibration Information:
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Fully featured single function tester that fits your hand - a great way to go 18th edition testing

The KT300DL single function tester, using the latest in technology, provides a slick way to satisfy your requirements for 18th edition installations as well as a great maintenance instrument. Compact, accurate, easy to use with a ‘hands free’ facility.

The KT300 insulation/continuity tester has now been upgraded to the KT300DL providing an additional SPD test and a 30 K ohm continuity range for verifying extraneous conductive parts.

Kewtech KT300DL Comes Supplied With:

ACC020 two-wire test lead set
Carry Case
Manual
Batteries
Calibration certificate

Key Benefits:

Hands free function
Magnetic hanger for clipping onto metal distribution boards
Small, light and compact

Makes a great 18th Edition kit along with the KT400 (Loop Impedance Tester) and the KT500 (RCD Tester).

Kewtech KT300 Digital Insulation/ Continuity Tester Technical Specifications
Continuity Test Range Accuracy
Range		Tolerance (@20ºc)
0.00 to 9.99 Ω		+ (3% + 2 digits)
10.0 to 99.9 Ω		+ (3% + 2 digits)
100 to 19.99 kΩ		+ (3% + 2 digits)
Open circuit Voltage		>4V, <10V
Zero offset adjust (test lead null)		5 Ω
Typical test time (2 Ω)		>2 seconds
Hazard Warning LED		>25V
Run Leakage
Test Voltage	Ranges (Auto Range)		Tolerance (@ 20°C)
50 V	0.01 to 9.99 MΩ		± (6% + 2 digits)
	10.0 to 49.9 MΩ		± (6% + 2 digits)
100 V	0.01 to 999 MΩ		± (6% + 2 digits)
	10.0 to 99.9 MΩ		± (6% + 2 digits)
250 V	0.01 to 9.99 MΩ		± (3% + 1 digits)
	10.0 to 99.9 MΩ		± (3% + 1 digits)
	100 to 199 MΩ		± (6% + 1 digits)
500 V	0.01 to 9.99 MΩ		± (3% + 1 digits)
	10.0 to 99.9 MΩ		± (3% + 1 digits)
	100 to 199 MΩ		± (3% + 1 digits)
	200 to 499 MΩ		± (6% + 1 digits)
1000 V	0.01 to 9.99 MΩ		± (3% + 1 digits)
	10.0 to 99.9 MΩ		± (3% + 1 digits)
	100 to 399 MΩ		± (3% + 1 digits)
	400 to 999 MΩ		± (6% + 1 digits)
Insualtion Output Voltage
Voltage	Load	Output Current	Tolerance
50 V	50 kΩ	1 mA	-0% +20%
100 V	100 kΩ	1 mA	-0% +20%
250 V	250 kΩ	1 mA	-10% +20%
500 V	500 kΩ	1 mA	-10% +20%
1000 V	1 MΩ	1 mA	-10% +20%
Short circuit current (into 2k Ω)			< 2 mA
Typical Test Time (10 MΩ)			< 2 seconds
General Specifications
Power supply		4 x AA LR6 Batteries
Battery life		50 hours
Overvoltage category		CAT III 500V
		CAT IV 300V
Operating temperature		0 - 40ºC
Storage temperature		-10 to 60ºC
Operating humidity		80% @ 31ºC to 50% @ 40ºC
Safety compliance		BSEN 61010-2-030:2010
EMC compliance		BSEN 61326-2-2:2013
Performance standard		BSEN 61557-1:2007
		BSEN 61557-2:2007
		BSEN 61557-4:2007
Probes		GS38 compliant
Dimension (mm)		180mm x 85mm x 50mm
Weight (g)		Approximately 450g