ISS Keyring Calibration Card Tester Check

ISS Keyring Calibration Card Tester Check

Product Code: TOOCALCARD

Price

£17.95 ex. VAT £21.54 inc. VAT

In Stock

Add To Favourites
Detailed Description

Key features:

Verified measurements include the instrument probes
Recessed pads enable probe location
Reliable, quick and repeatable
Universal interface for all makes of instrument
CalCard is the only checkbox that verifies the instrument and the probes together
Convenience for comparisons
Traceable reference standards
Indelible for inspector’s authentication

Does the calibration of YOUR meter check out?

A verification unit is a necessary tool required by all tradesman working with electrics both in domestic and commercial environments.

The CalCard verification unit utilises a specific fixed range of resistance values, through which the ongoing accuracy and operation of test instruments between calibration periods can be verified.

This verification process is one of the mandatory requirements for meeting acceptable standards for all tradesman working in electrical environments. In the UK it is deemed one of the requirements to demonstrate “competence” of the tradesman by all inspectorates and the Health and Safety Executive.

What makes the national award winning CalCard the most popular choice with tradesmen and inspectorates is not just its size and affordability, but more importantly the ability to verify both the instrument and probes together.

The CalCard is one of the most affordable pieces of test equipment to meet compliance requirements.

*If you've already purchased your Cal Card and you're looking for our easy to follow setup guide, please click the image below.

Once you've set up your CalCard, you can grab our handy CalCard Record Sheet and RCD Record Sheet to log your recordings.

What has made the CalCard the most popular choice for Electricians?

The CalCard satisfies all appointed inspectorates, British and European standards and HSE requirements with regard to instrument continuity and insulation verification, reflected in the recommendations from all inspectorates and governing bodies.

There are over 15,000 CalCards in use in the UK by End Users, Suppliers, Distributors, Training and Calibration Companies.

This successful and innovative product when first introduced presented a new radical approach to the then large and expensive “Box” solutions. However after winning three national major electrical awards, followed by ELECSA and NICEIC endorsement with re-badging the CalCard has gained an excellent unchallenged reputation.

Simply search CalCard Forum to read some of the independent reviews.

Handy & Compact

Yes it really is credit card sized but more robust and not as flimsy.
Incorporating a hole for the included key ring.
Small enough to be stored with the instrument or even in your wallet.
There when you need it
Not lost in a toolbox or van
Built tough for the engineering environment
Integral Keyring for attachment to the instrument?

Test instrument contact is made through specifically constructed gold plated recessed touch pads.

Other Checkboxes and verification tools incorporate 4mm sockets, these not only limit the range of instrument but also require the removal of the instrument probes and clips to enable testing.

The CalCard works with all instruments and with whatever probes are connected to the instrument.

An integral part of compliance is that users record their periodical measurements against an identifiable check source. These records then demonstrate to an inspector that users are performing the verification task.

This operation is simplified on the CalCard by the inclusion of an identification serial number and provision of base value recording grid on the rear of the CalCard.

These are then sealed with a protective covering providing an indelible record for inspectorates.

The Cal Card is Recommended/Endorsed by the following industy bodies

Endorsements Complete