TPI 293 Digital Clamp Meter Amp Plus

Product Code: TPI293

Price

£99.99 ex. VAT £119.99 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Clamp-on plus DMM with True RMS capabilities
All basic electrical functions, plus:
True RMS: Provides accurate and dependable readings of non-linear loads.
Bar Graph: When measuring frequency, bar graph indicates current level.
TRIM Mode: Smooths out unstable readings.
Peak Mode: For start-up and inrush currents.
Sleep Mode: Preserves battery life.
Data Hold: Holds the reading on the display for easy viewing.

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

The TPI 293 TRMS clamp meter offers a range of electrical measurements, with DC and AC voltage measurement up to 600V, resistance to 40k and continuity and diode testing up to 3V, plus more.

The TPI 293 Is Supplied With:

Carrying Pouch
Test Lead Set
Instruction Manual
Battery

Applications:

Heat anticipator current in thermostats
Line voltage
Control circuit voltage
Heating element resistance
Compressor winding resistance
Contactor and relay coil resistance
Motor and compressor start up current
Continuity of wiring
Frequency on control and line voltage
Record/Min/Max voltage of controls and line voltages
Bar graph to indicate rapid fluctuations

DCV
Range	40V 400V 600V
Resolution	0.01V 0.1V 1V
Accuracy	± 0.75% of reading, ± 3 digits
Impedance	10MΩ
ACV (45 Hz to 60 Hz)
Range	40V 400V 600V
Resolution	0.01V 0.1V 1V
Accuracy	± 1.0% of reading, ± 3 digits
Impedance	10MΩ
ACV (20 Hz to 45 Hz, 60Hz to 1KHz)
Range	40V 400V 600V
Resolution	0.01V 0.1V 1V
Accuracy	± 2.5% of reading, ± 3 digits
Impedance	10MΩ
ACA
Range	40A 400A 700A
Resolution	0.01A 0.1A 1A
Accuracy	± 2% of reading, ± 20 digits ± 4% of reading, ± 20 digits ± 4% of reading, ± 20 digits
Accuracy	± 2% of reading, ± 10 digits ± 5% of reading, ± 10 digits ± 5% of reading, ± 10 digits
Frequency Response	45Hz to 60Hz 30Hz to 45Hz 60Hz to 1KHz
Frequency Response	45Hz to 60Hz 30Hz to 45Hz 60Hz to 1KHz
OHM (Resistance)
Range	400 4k 40k
Resolution	0.1 0.001k 0.01k
Accuracy	± 1% of reading, ± 10 digits
Accuracy	± 1% of reading, ± 3 digits
Overload Protection	600V DC or AC Peak
Continuity Buzzer
Test Voltage	3V
Threshold	<100 (100 digits)
Overload Protection	600 V DC or Peak AC
Diode Test
Test Voltage	3V
Max Test Current	Approx. 2.5mA
Over Load Protection	600V DC or AC Peak
Frequency
Range	1KHz 10KHz
Resolution	0.1Hz 0.001KHz
Accuracy	± 0.2% of reading, ± 3 digits
Overload Protection	600V DC or Peak AC
General Specifications
Max. Volt. between any Input and Ground	600V
Display Type	4,000 Count, 4 times per second update
Operating Temp.	-10° to 45° C (14° to 113° F)
Storage Temp.	-20° to 55° C (-4°to 131° F)
Relative Humidity	0% to 80% (0° - 35° C/32° - 95°F) 0% to 70% (35° - 50°C/95°- 122°F)
Power Supply	9 Volt Battery
Battery Life	80 hrs. Alkaline
Size (H x L x W)	40mm x 190mm x 65mm (1.5in x 7.25in x 2.5in)
Weight	315g (11.1oz)