TPI 270 Digital Clamp Meter

Product Code: TPI270

Price

£91.95 ex. VAT £110.34 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Test AC/DC voltage to 600V
DC current measurements to 400μA
AC current measurements to 400A
Resistance measurements to 40MΩ
Frequency measurements to 400MHz
Capacitance testing to 40000μF
Temperature measurements to 1000°F
Continuity and diode testing
Small-size jaws to fit in tight applications
Non-contact voltage detector built-in
MIN/MAX recording over a time period
Data hold function temporarily stores the last value taken on the screen
4000 count digital display with 41 segment analogue bargraph
Auto/manual ranging
Low battery indicator
Over range indication
High voltage indicator
Auto power off after 30 minutes of inactivity
Separate battery/fuse compartment

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

The TPI 270 400A AC Clamp Meter provides excellent value and offers measurement for AC current up to 400A and AC/DC voltage up to 600V.

Additional measurements include resistance up to 40Ω, frequency up to 400MHz, capacitance up to 40,000µF, and temperature from -34ÃÅ¡C to 537ÃÅ¡C. A DC microamp range (400µA) allows the user to test smoke detectors and it is suitable for a range of other HVAC tasks whilst continuity and diode testing is also available.

Several other advanced measurement features supplement the basic functionality on the TPI 270. It boasts min/max recording and data hold whilst peak hold captures the highest value recorded. Relative mode permits comparison between two values as well as differential temperature. Automatic and manual ranging allow the user to choose between accuracy and precision whilst high resolutions for each parameter help give an in-depth picture of system performance.

The TP 270’s slim design allows it to be worked into tight and awkward spaces whilst all results are shown on a clear digital display that also features an analogue bar graph. Non-contact voltage detection adds additional security alongside the Cat II 1000V and Cat III 600V safety ratings. The meter is supplied with a thermocouple, test leads and a case. A three-year manufacturer’s warranty covers the device and it has an 80-hour battery life.

The TPI 270 Clamp Meter Is Supplied With:

TPI 270 Digital Clamp Meter
Standard K-Type Thermocouple Probe
UL-Listed Silicone Test Lead Set with Alligator Clips
Soft Carrying Pouch

Applications:

Measure flame safety control current
Test run and start capacitors and motors
Measure motor run current and capture peak motor start up amperage
Measure heat anticipator current
Determine thermocouple voltage
Test line and control voltages
Measure heating element resistance
Measure air temperature in ducts
Test for the presence of voltage in circuits without contacting the circuit
Measure temperature differential using relative mode

Basic DC Accuracy	0.5%
DC Voltage
Max Range	600V
Resolution	0.1mV
AC Voltage
Max Range	600V
Resolution	0.1mV
DC Current
Max Range	400μA
Resolution	0.01μA
AC Current
Max Range	400A
Resolution	0.01A
Resistance
Max Range	40Ω
Resolution	0.1Ω
Frequency
Max Range	400MHz
Resolution	0.001KHz
Capacitance
Max Range	40000μF
Resolution	0.001nF
Temperature
Max Range	1000°F
Resolution	0.1°F
Diode
Test Current	Max 1.5mA
Continuity
Buzzer	Sounds at approx 35Ω Response time: 50ms
General Specs
Agency Approval	CEIEC 1010: CATIII; 600V cULus 61010
Overall Dimensions	10" x 1.3" x 2.5" (255 x 32.5 x 65mm)
Weight	.8lbs (363g)