Fluke i30S AC DC Current Clamp

Product Code: FLUI30S

Price
£632.45 ex. VAT £758.94 inc. VAT

Available In 3-7 Days


Add To Favourites
Detailed Description

Features:

  • Measurement of both DC and AC current.
  • Measures up to 30A
  • Jaw Capacity of 16mm
  • May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Electrical specifications
Specified current range
   30 mA to 30A dc, 30 mA to 20 A ac rms
Usable current range
   5 mA to 30 A dc, 30 mA to 20 A ac rms
Crest Factor
   1.4"
Output sensitivity
   100 mV/A
Accuracy (at +25 °C)
   ± 1 % of reading ± 2 mA
Resolution
   ± 1 mA
Load impedance
   > 100 kΩ
Conductor position sensitivity
   ± 1 % relative to center reading
Frequency range
   DC to 100 kHz (- 0.5 dB)
Phase shift below 1 kHz
   < 2 degrees
Temperature coefficient
   ± 0.01 % of reading/°C
Power supply
   9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)
   300 V ac rms or dc

 

General specifications
Maximum conductor size
   19 mm diameter
Output connection
   Safety BNC connector, supplied with safety 4 mm adapter
Output zero
   Manual adjust via thumbwheel
Cable length
   2 meters
Operating temperature range
   0 °C to +50 °C
Storage temperature range (with battery removed)
   -20 °C to +85 °C
Operating humidity
   15 % to 85 % (non-condensing)
Weight
   250 g
Safety standards
   BS EN 61010-1: 2001
   BS EN 61010-2-032: 2002
   BS EN 61010-031: 2002
   300 Vrms, Category III, Pollution Degree 2
   Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.
EMC Standards
   EN 61326: 1998 +A1, A2, & A3
UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Recently Viewed